1013 lines
35 KiB
XML
1013 lines
35 KiB
XML
## version $VER: ppp-ethernet.catalog 1.7 (7.6.2005)
|
|
## codeset 0
|
|
## language deutsch
|
|
;
|
|
MSG_LOGIN_PASSWORD_ACKNOWLEDGED_MESSAGE_TXT
|
|
Zugang/Kennwort bestätigt. %s
|
|
; Login/password acknowledged. %s
|
|
;
|
|
MSG_LOGIN_PASSWORD_ACKNOWLEDGED_TXT
|
|
Zugang/Kennwort bestätigt.
|
|
; Login/password acknowledged.
|
|
;
|
|
MSG_LOGIN_PASSWORD_NOT_ACKNOWLEDGED_MESSAGE_TXT
|
|
FEHLER: Zugang/Kennwort nicht bestätigt. %s
|
|
; ERROR: Login/password not acknowledged. %s
|
|
;
|
|
MSG_LOGIN_PASSWORD_NOT_ACKNOWLEDGED_TXT
|
|
FEHLER: Zugang/Kennwort nicht bestätigt.
|
|
; ERROR: Login/password not acknowledged.
|
|
;
|
|
MSG_UNSUPPORTED_PAP_MESSAGE_CODE_TXT
|
|
FEHLER: Unbekannte Kennwortanmeldung Nummer %ld (0x%02lx) empfangen.
|
|
; ERROR: Unknown/unsupported password authentication message code %ld (0x%02lx) received.
|
|
;
|
|
MSG_SENDING_PAP_REQUEST_TXT
|
|
Versende Anfrage zur Anmeldung mit Kennwort für Zugang '%s'.
|
|
; Sending password authentication request for login '%s'.
|
|
;
|
|
MSG_SENDING_CHAP_MESSAGE_TOO_LONG_TXT
|
|
FEHLER: Anmeldenachricht für Protokoll 'CHAP' ist zu lang (%lD > %lD).
|
|
; ERROR: Challenge handshake authentication message is too long (%ld > %ld).
|
|
;
|
|
MSG_CHAP_MESSAGE_RECEIVED_TXT
|
|
Anmeldenachricht für Protokoll 'CHAP' von '%s' empfangen; Nachricht wird beantwortet...
|
|
; Challenge handshake authentication message received from '%s'; responding...
|
|
;
|
|
MSG_SENDING_CHAP_MESSAGE_TOO_SHORT_TXT
|
|
FEHLER: Anmeldenachricht für Protokoll 'CHAP' ist zu kurz.
|
|
; ERROR: Challenge handshake authentication message is too short.
|
|
;
|
|
MSG_CHALLENGE_ACKNOWLEDGED_MESSAGE_TXT
|
|
Anmeldung bestätigt. %s
|
|
; Challenge acknowledged. %s
|
|
;
|
|
MSG_CHALLENGE_ACKNOWLEDGED_TXT
|
|
Anmeldung bestätigt.
|
|
; Challenge acknowledged.
|
|
;
|
|
MSG_CHALLENGE_NOT_ACKNOWLEDGED_MESSAGE_TXT
|
|
FEHLER: Anmeldung wurde nicht bestätigt. %s
|
|
; ERROR: Challenge was not acknowledged. %s
|
|
;
|
|
MSG_CHALLENGE_NOT_ACKNOWLEDGED_TXT
|
|
FEHLER: Anmeldung wurde nicht bestätigt.
|
|
; ERROR: Challenge was not acknowledged.
|
|
;
|
|
MSG_UNKNOWN_CHAP_MESSAGE_CODE_TXT
|
|
FEHLER: Unbekannte Kennwortanmeldung Nummer %ld (0x%02lx) für Protokoll 'CHAP' empfangen.
|
|
; ERROR: Unknown/unsupported challenge handshake authentication code %ld (0x%02lx).
|
|
;
|
|
MSG_SHUTTING_DOWN_LCP_TXT
|
|
Verbindungssteuerungsprotokoll (LCP) wird heruntergefahren.
|
|
; Shutting down Link Control Protocol (LCP).
|
|
;
|
|
MSG_CLOSING_LCP_TXT
|
|
Verbindungssteuerungsprotokoll (LCP) wird deaktiviert.
|
|
; Closing Link Control Protocol (LCP).
|
|
;
|
|
MSG_LCP_CLOSED_TXT
|
|
Verbindungssteuerungsprotokoll (LCP) ist deaktiviert.
|
|
; Link Control Protocol (LCP) closed.
|
|
;
|
|
MSG_FRAME_TO_SEND_BYTES_TXT
|
|
Zu sendender Rahmen = %lD Bytes.
|
|
; Frame to send = %ld bytes.
|
|
;
|
|
MSG_CURRENT_BUFFER_SIZE_BYTES_TXT
|
|
Aktuelle Puffergröße = %lD Bytes (0x%lx).
|
|
; Current buffer size = %ld bytes (0x%lx).
|
|
;
|
|
MSG_RAW_INPUT_FRAME_SIZE_BYTES_TXT
|
|
Ausgangsgröße der empfangenen Rahmendaten = %lD Bytes (0x%lx), beginnend bei Position %ld (0x%lx).
|
|
; Raw input frame size = %ld bytes (0x%lx), starting at position %ld (0x%lx).
|
|
;
|
|
MSG_INPUT_FRAME_SIZE_BYTES_TXT
|
|
Empfangene Rahmengröße = %lD Bytes (0x%lx).
|
|
; Input frame size = %ld bytes (0x%lx).
|
|
;
|
|
MSG_FRAME_CHECKSUM_INVALID_TXT
|
|
Prüfsumme der Rahmendaten ist ungültig.
|
|
; Frame checksum is not valid.
|
|
;
|
|
MSG_REJECTING_IPCP_OPTION_TXT
|
|
Option 0x%02lx des Internetprotokoll-Steuerungsprotokolls (IPCP) wird abgelehnt.
|
|
; Rejecting Internet Protocol Control Protocol (IPCP) option 0x%02lx.
|
|
;
|
|
MSG_HEADER_COMPRESSION_WITH_SLOTS_NOT_ACCEPTABLE_TXT
|
|
Kopfdatenkompression mit %lD Einträgen ist unzulässig.
|
|
; Header compression with %ld slots is not acceptable.
|
|
;
|
|
MSG_PEER_IPCP_CONFIG_ACKNOWLEDGED_TXT
|
|
Konfiguration des Internetprotokoll-Steuerungsprotokolls (IPCP) der Gegenstelle wurde bestätigt.
|
|
; Peer's Internet Protocol Control Protocol (IPCP) configuration acknowledged.
|
|
;
|
|
MSG_PEER_SUPPORTS_HEADER_COMPRESSION_TXT
|
|
Gegenstelle unterstützt Kopfdatenkompression (Max-Slot-ID = %ld, Comp-Slot-ID = %ld).
|
|
; Peer supports header compression (Max-Slot-ID = %ld, Comp-Slot-ID = %ld).
|
|
;
|
|
MSG_PEER_DOES_NOT_SUPPORT_HEADER_COMPRESSION_TXT
|
|
Gegenstelle unterstützt keine Kopfdatenkompression.
|
|
; Peer does not support header compression.
|
|
;
|
|
MSG_REMOTE_IP_ADDRESS_USING_DEFAULTS_TXT
|
|
Netzadresse der Gegenstelle = %ld.%ld.%ld.%ld (statt %ld.%ld.%ld.%ld wird der Vorgabewert benutzt)
|
|
; Remote IP-Address = %ld.%ld.%ld.%ld (using configuration defaults rather than %ld.%ld.%ld.%ld)
|
|
;
|
|
MSG_REMOTE_IP_ADDRESS_TXT
|
|
Netzadresse der Gegenstelle = %ld.%ld.%ld.%ld
|
|
; Remote IP-Address = %ld.%ld.%ld.%ld
|
|
;
|
|
MSG_SENDING_IPCP_CONFIG_REQUEST_TXT
|
|
Versende Anfrage zur Einrichtung des Internetprotokoll-Steuerungsprotokolles (IPCP)...
|
|
; Sending Internet Protocol Control Protocol (IPCP) configuration request...
|
|
;
|
|
MSG_RECEIVED_NEGATIVE_IPCP_CONFIG_ACKNOWLEDGEMENT_TXT
|
|
Negative Bestätigung zur Einrichtung des Internetprotokoll-Steuerungsprotokolles (IPCP) wurde empfangen.
|
|
; Received negative Internet Protocol Control Protocol (IPCP) configuration request acknowledgement.
|
|
;
|
|
MSG_MAXIMUM_VJHC_SLOT_ID_TOO_SMALL_TXT
|
|
Maximale Anzahl von Einträgen %lD für Kopfdatenkompression ist zu klein; Kopfdatenkompression wurde deaktiviert.
|
|
; Maximum slot ID %ld is too small for us; header compression disabled.
|
|
;
|
|
MSG_MAXIMUM_VJHC_SLOT_ID_TOO_LARGE_TXT
|
|
Maximale Anzahl von Einträgen %lD für Kopfdatenkompression ist zu groß; Kopfdatenkompression wurde deaktiviert.
|
|
; Maximum slot ID %ld is too large for us; header compression disabled.
|
|
;
|
|
MSG_VJHC_ENABLED_TXT
|
|
Kopfdatenkompression wurde aktiviert.
|
|
; Header compression enabled.
|
|
;
|
|
MSG_UNKNOWN_IP_HEADER_COMPRESSION_PROTOCOL_TXT
|
|
Kopfdatenkompressionsprotokoll 0x%lx wird nicht unterstützt; Kopfdatenkompression wurde deaktiviert.
|
|
; Unknown IP header compression protocol 0x%lx; header compression disabled.
|
|
;
|
|
MSG_LOCAL_IP_ADDRESS_TXT
|
|
Lokale Netzadresse = %ld.%ld.%ld.%ld
|
|
; Local IP-Address = %ld.%ld.%ld.%ld
|
|
;
|
|
MSG_PRIMARY_DNS_ADDRESS_TXT
|
|
Adresse des primären DNS-Servers = %ld.%ld.%ld.%ld
|
|
; Primary-DNS-Address = %ld.%ld.%ld.%ld
|
|
;
|
|
MSG_SECONDARY_DNS_ADDRESS_TXT
|
|
Adresse des sekundären DNS-Servers = %ld.%ld.%ld.%ld
|
|
; Secondary-DNS-Address = %ld.%ld.%ld.%ld
|
|
;
|
|
MSG_UNSUPPORTED_IPCP_OPTION_TXT
|
|
Option 0x%02lx (%ld) des Internetprotokoll-Steuerungsprotokolls (IPCP) wird nicht unterstützt.
|
|
; Unsupported/unknown Internet Protocol Control Protocol (IPCP) option 0x%02lx (%ld).
|
|
;
|
|
MSG_RECEIVED_IPCP_CONFIG_REQUEST_REJECT_MESSAGE_TXT
|
|
Ablehnung der Einrichtung des Internetprotokoll-Steuerungsprotokolls (IPCP) wurde empfangen.
|
|
; Received Internet Protocol Control Protocol (IPCP) configuration request reject message.
|
|
;
|
|
MSG_VJHC_COMPRESSION_DISABLED_TXT
|
|
Kopfdatenkompression wurde deaktiviert.
|
|
; Header compression disabled.
|
|
;
|
|
MSG_IP_ADDRESS_REJECTED_TXT
|
|
Netzadresse %ld.%ld.%ld.%ld wurde abgelehnt.
|
|
; IP-Address %ld.%ld.%ld.%ld rejected.
|
|
;
|
|
MSG_PRIMARY_DNS_ADDRESS_REJECTED_TXT
|
|
Adresse des primären DNS-Servers %ld.%ld.%ld.%ld wurde abgelehnt.
|
|
; Primary-DNS-Address %ld.%ld.%ld.%ld rejected.
|
|
;
|
|
MSG_SECONDARY_DNS_ADDRESS_REJECTED_TXT
|
|
Adresse des sekundären DNS-Servers %ld.%ld.%ld.%ld wurde abgelehnt.
|
|
; Secondary-DNS-Address %ld.%ld.%ld.%ld rejected.
|
|
;
|
|
MSG_RECEIVED_IPCP_CONFIG_REQUEST_TXT
|
|
Anfrage zur Einrichtung des Internetprotokoll-Steuerungsprotokolles (IPCP) wurde empfangen.
|
|
; Received Internet Protocol Control Protocol (IPCP) configuration request.
|
|
;
|
|
MSG_RECEIVED_IPCP_CODE_REJECT_MESSAGE_TXT
|
|
Ablehnung des Internetprotokoll-Steuerungsprotokolls (IPCP) wurde empfangen.
|
|
; Received Internet Protocol Control Protocol (IPCP) code reject message.
|
|
;
|
|
MSG_REJECTED_PACKET_SIZE_BYTES_TXT
|
|
Datenpaketgröße = %lD Bytes (0x%lx) wurde abgelehnt
|
|
; Rejected packet size = %ld bytes (0x%lx)
|
|
;
|
|
MSG_IPCP_THIS_LAYER_UP_TXT
|
|
Internetprotokoll-Steuerungsprotokolls (IPCP) wird aktiviert
|
|
; Internet Protocol Control Protocol (IPCP) This-Layer-Up
|
|
;
|
|
MSG_DRIVER_NOW_ONLINE_TXT
|
|
Treiber ist jetzt mit dem Netz verbunden.
|
|
; Driver is now online.
|
|
;
|
|
MSG_IPCP_THIS_LAYER_DOWN_TXT
|
|
Internetprotokoll-Steuerungsprotokolls (IPCP) wird deaktiviert
|
|
; Internet Protocol Control Protocol (IPCP) This-Layer-Down
|
|
;
|
|
MSG_IPCP_THIS_LAYER_FINISHED_TXT
|
|
Internetprotokoll-Steuerungsprotokolls (IPCP) ist jetzt deaktiviert
|
|
; Internet Protocol Control Protocol (IPCP) This-Layer-Finished
|
|
;
|
|
MSG_DRIVER_NOW_OFFLINE_TXT
|
|
Treiber ist jetzt vom Netz getrennt.
|
|
; Driver is now offline.
|
|
;
|
|
MSG_RECEIVED_POSITIVE_IPCP_CONFIG_REQUEST_ACKNOWLEDGEMENT_TXT
|
|
Positive Bestätigung zur Einrichtung des Internetprotokoll-Steuerungsprotokolles (IPCP) wurde empfangen.
|
|
; Received positive Internet Protocol Control Protocol (IPCP) configuration request acknowledgement.
|
|
;
|
|
MSG_IPCP_CONFIGURE_ACK_ID_DOES_NOT_MATCH_TXT
|
|
Identifikationsnummer 0x%08lx der positiven Bestätigung zur Einrichtung des Internetprotokoll-Steuerungsprotokolles (IPCP) paßt nicht zu Identifikationsnummer 0x%08lx.
|
|
; Internet Protocol Control Protocol (IPCP) Configure-Ack ID 0x%08lx does not match identifier 0x%08lx.
|
|
;
|
|
MSG_IPCP_CONFIGURE_NAK_ID_DOES_NOT_MATCH_TXT
|
|
Identifikationsnummer 0x%08lx der negativen Bestätigung zur Einrichtung des Internetprotokoll-Steuerungsprotokolles (IPCP) paßt nicht zu Identifikationsnummer 0x%08lx.
|
|
; Internet Protocol Control Protocol (IPCP) Configure-Nak ID 0x%08lx does not match identifier 0x%08lx.
|
|
;
|
|
MSG_IPCP_CONFIGURE_REJECT_ID_DOES_NOT_MATCH_TXT
|
|
Identifikationsnummer 0x%08lx der Ablehnung zur Einrichtung des Internetprotokoll-Steuerungsprotokolles (IPCP) paßt nicht zu Identifikationsnummer 0x%08lx.
|
|
; Internet Protocol Control Protocol (IPCP) Configure-Reject ID 0x%08lx does not match identifier 0x%08lx.
|
|
;
|
|
MSG_IPCP_TERMINATE_ACK_ID_DOES_NOT_MATCH_TXT
|
|
Identifikationsnummer 0x%08lx der Ablehnung zum Herunterfahren des Internetprotokoll-Steuerungsprotokolles (IPCP) paßt nicht zu Identifikationsnummer 0x%08lx.
|
|
; Internet Protocol Control Protocol (IPCP) Terminate-Ack ID 0x%08lx does not match identifier 0x%08lx.
|
|
;
|
|
MSG_REJECTING_AUTHENTICATION_PROTOCOL_DUE_TO_NO_LOGIN_TXT
|
|
Anmeldungsprotokoll wird abgelehnt, da keine Kennung angegeben wurde.
|
|
; Rejecting authentication protocol because no login is provided.
|
|
;
|
|
MSG_REJECTING_LCP_OPTION_TXT
|
|
Option 0x%02lx (%ld) des Verbindungssteuerungsprotokolls (LCP) wird abgelehnt.
|
|
; Rejecting Link Control Protocol (LCP) option 0x%02lx (%ld).
|
|
;
|
|
MSG_MTU_IS_SMALLER_THAN_TXT
|
|
Maximalgröße einer Übertragungseinheit %lD ist kleiner als 64. Dies ist nicht akzeptabel.
|
|
; Maximum transmission unit %ld is smaller than 64, which is not acceptable.
|
|
;
|
|
MSG_LINK_QUALITY_PROTOCOL_NOT_ACCEPTABLE_TXT
|
|
Das Protokoll 0x%04lx zur Prüfung der Verbindungsqualität ist nicht akzeptabel.
|
|
; Link quality protocol 0x%04lx is not acceptable.
|
|
;
|
|
MSG_CHAP_ALGORITHM_NOT_ACCEPTABLE_TXT
|
|
Anmeldungsverfahren des 'CHAP'-Protokolles ist nicht %ld. Dies ist nicht akzeptabel.
|
|
; Challenge Handshake Authentication algorithm is not %ld, which is not acceptable.
|
|
;
|
|
MSG_SUGGESTING_CHAP_TXT
|
|
Das 'CHAP'-Anmeldungsprotokoll wird vorgeschlagen.
|
|
; Suggesting Challenge Handshake Authentication Protocol.
|
|
;
|
|
MSG_AUTHENTICATION_PROTOCOL_NOT_ACCEPTABLE_TXT
|
|
Anmeldungsprotokoll 0x%04lx ist nicht akzeptabel.
|
|
; Authentication protocol 0x%04lx is not acceptable.
|
|
;
|
|
MSG_PEER_LCP_CONFIGURATION_ACKNOWLEDGED_TXT
|
|
Konfiguration des Verbindungssteuerungsprotokolles (LCP) der Gegenstelle wurde bestätigt.
|
|
; Peer's Link Control Protocol (LCP) configuration acknowledged.
|
|
;
|
|
MSG_MTU_SIZE_BYTES_TXT
|
|
Maximalgröße einer Übertragungseinheit (MTU) = %lD Bytes.
|
|
; Maximum transmission unit (MTU) = %ld.
|
|
;
|
|
MSG_PEER_ACCM_TXT
|
|
Steuerzeichenmaske der Gegenstelle = 0x%08lx
|
|
; Peer's Async-Control-Character-Map = 0x%08lx
|
|
;
|
|
MSG_PEER_AUTHENTICATION_PROTOCOL_TXT
|
|
Anmeldungsprotokoll der Gegenstelle = 0x%04lx (%s)
|
|
; Peer's Authentication-Protocol = 0x%04lx (%s)
|
|
;
|
|
MSG_PEER_AUTHENTICATION_ALGORITHM_TXT
|
|
Vom Anmeldungsprotokoll benutztes Verfahren = %lD (%s)
|
|
; Peer's Authentication-Algorithm = %ld (%s)
|
|
;
|
|
MSG_SENDING_LCP_CONFIGURATION_REQUEST_TXT
|
|
Versende Anfrage zur Einrichtung des Verbindungssteuerungsprotokolles (LCP)...
|
|
; Sending Link Control Protocol (LCP) configuration request...
|
|
;
|
|
MSG_RECEIVED_NEGATIVE_LCP_CONFIGURATION_REQUEST_TXT
|
|
Negative Bestätigung zur Einrichtung des Verbindungssteuerungsprotokolles (LCP) wurde empfangen.
|
|
; Received negative Link Control Protocol (LCP) configuration request acknowledgement.
|
|
;
|
|
MSG_MAXIMUM_RECEIVE_UNIT_BYTES_TXT
|
|
Maximale Größe der Dateneinheit, die empfangen werden kann = %lD Bytes
|
|
; Maximum-Receive-Unit = %ld
|
|
;
|
|
MSG_LOCAL_ACCM_TXT
|
|
Lokale Steuerzeichenmaske = 0x%08lx
|
|
; Local Async-Control-Character-Map = 0x%08lx
|
|
;
|
|
MSG_QUALITY_PROTOCOL_TXT
|
|
Qualitätsmeßprotokoll = 0x%04lx
|
|
; Quality-Protocol = 0x%04lx
|
|
;
|
|
MSG_REPORTING_PERIOD_TXT
|
|
Dauer der Meldeperiode = %lD Sekunde(n)
|
|
; Reporting-Period = %ld second(s)
|
|
;
|
|
MSG_UNSUPPORTED_LCP_OPTION_TXT
|
|
Option 0x%02lx (%ld) des Verbindungssteuerungsprotokolls (LCP) wird nicht unterstützt.
|
|
; Unsupported/unknown Link Control Protocol (LCP) option 0x%02lx (%ld).
|
|
;
|
|
MSG_RECEIVED_POSITIVE_LCP_CONFIG_REQUEST_ACKNOWLEDGEMENT_TXT
|
|
Positive Bestätigung zur Einrichtung des Verbindungssteuerungsprotokolles (LCP) wurde empfangen.
|
|
; Received positive Link Control Protocol (LCP) configuration request acknowledgement.
|
|
;
|
|
MSG_RECEIVED_LCP_CONFIG_REQUEST_REJECT_MESSAGE_TXT
|
|
Ablehnung des Verbindungssteuerungsprotokolls (LCP) wurde empfangen.
|
|
; Received Link Control Protocol (LCP) configuration request reject message.
|
|
;
|
|
MSG_REJECTED_MAXIMUM_RECEIVE_UNIT_TXT
|
|
Abgelehnte maximale Größe der Dateneinheit, die empfangen werden kann = %lD Bytes
|
|
; Rejected Maximum-Receive-Unit = %ld
|
|
;
|
|
MSG_REJECTED_LOCAL_ACCM_TXT
|
|
Abgelehnte lokale Steuerzeichenmaske = 0x%08lx
|
|
; Rejected Local Async-Control-Character-Map = 0x%08lx
|
|
;
|
|
MSG_REJECTED_LOCAL_AUTHENTICATION_PROTOCOL_TXT
|
|
Abgelehntes lokales Anmeldeprotokoll = 0x%04lx
|
|
; Rejected Local Authentication-Protocol = 0x%04lx
|
|
;
|
|
MSG_REJECTED_LOCAL_AUTHENTICATION_ALGORITHM_TXT
|
|
Abgelehntes lokales Verfahren des Anmeldeprotokolles = %ld
|
|
; Rejected Local Authentication-Algorithm = %ld
|
|
;
|
|
MSG_REJECTED_QUALITY_PROTOCOL_TXT
|
|
Abgelehntes Qualitätsmeßprotokoll = 0x%04lx
|
|
; Rejected Quality-Protocol = 0x%04lx
|
|
;
|
|
MSG_REJECTED_MAGIC_NUMBER_TXT
|
|
Abgelehnte Kennzahl = 0x%08lx
|
|
; Rejected Magic-Number = 0x%08lx
|
|
;
|
|
MSG_PROTOCOL_FIELD_COMPRESSION_DISABLED_TXT
|
|
Protokollfeldkompression ist abgeschaltet.
|
|
; Protocol-Field-Compression is disabled.
|
|
;
|
|
MSG_ADDRESS_AND_CONTROL_FIELD_COMPRESSION_DISABLED_TXT
|
|
Address- und Protokollfeldkompression ist abgeschaltet.
|
|
; Address-and-Control-Field-Compression is disabled.
|
|
;
|
|
MSG_REJECTED_UNSUPPORTED_LCP_OPTION_TXT
|
|
Option 0x%02lx (%ld) wurde abgelehnt
|
|
; Rejected unsupported/unknown option 0x%02lx (%ld)
|
|
;
|
|
MSG_RECEIVED_LCP_CONFIGURATION_REQUEST_TXT
|
|
Anfrage zur Einrichtung des Verbindungssteuerungsprotokolles (LCP) wurde empfangen.
|
|
; Received Link Control Protocol (LCP) configuration request.
|
|
;
|
|
MSG_RECEIVED_LCP_CODE_REJECT_MESSAGE_TXT
|
|
Ablehnung des Verbindungssteuerungsprotokolles (LCP) wurde empfangen.
|
|
; Received Link Control Protocol (LCP) code reject message.
|
|
;
|
|
MSG_REJECTED_LCP_PROTOCOL_REJECT_MESSAGE_TXT
|
|
Ablehnung des dem Verbindungssteuerungsprotokolle (LCP) angegebenen Übertragungsprotokolles wurde empfangen.
|
|
; Received Link Control Protocol (LCP) protocol reject message.
|
|
;
|
|
MSG_PROTOCOL_PACKET_SIZE_TXT
|
|
Abgelehntes Protokoll = 0x%04lx, Datenpaketgröße = %lD Byte(s) (0x%lx)
|
|
; Rejected protocol = 0x%04lx, packet size = %ld bytes (0x%lx)
|
|
;
|
|
MSG_LCP_CONFIGURE_ACK_ID_DOES_NOT_MATCH_TXT
|
|
Identifikationsnummer 0x%08lx der positiven Bestätigung zur Einrichtung des Verbindungssteuerungsprotokolles (LCP) paßt nicht zu Identifikationsnummer 0x%08lx.
|
|
; Link Control Protocol (LCP) Configure-Ack ID 0x%08lx does not match identifier 0x%08lx.
|
|
;
|
|
MSG_LCP_CONFIGURE_NAK_ID_DOES_NOT_MATCH_TXT
|
|
Identifikationsnummer 0x%08lx der negativen Bestätigung zur Einrichtung des Verbindungssteuerungsprotokolles (LCP) paßt nicht zu Identifikationsnummer 0x%08lx.
|
|
; Link Control Protocol (LCP) Configure-Nak ID 0x%08lx does not match identifier 0x%08lx.
|
|
;
|
|
MSG_LCP_CONFIGURE_REJECT_ID_DOES_NOT_MATCH_TXT
|
|
Identifikationsnummer 0x%08lx der Ablehnung zur Einrichtung des Verbindungssteuerungsprotokolles (LCP) paßt nicht zu Identifikationsnummer 0x%08lx.
|
|
; Link Control Protocol (LCP) Configure-Reject ID 0x%08lx does not match identifier 0x%08lx.
|
|
;
|
|
MSG_LCP_TERMINATE_ACK_ID_DOES_NOT_MATCH_TXT
|
|
Identifikationsnummer 0x%08lx der Ablehnung zum Herunterfahren des Verbindungssteuerungsprotokolles (LCP) paßt nicht zu Identifikationsnummer 0x%08lx.
|
|
; Link Control Protocol (LCP) Terminate-Ack ID 0x%08lx does not match identifier 0x%08lx.
|
|
;
|
|
MSG_LCP_THIS_LAYER_UP_TXT
|
|
Verbindungssteuerungsprotokolls (LCP) wird aktiviert
|
|
; Link Control Protocol (LCP) This-Layer-Up
|
|
;
|
|
MSG_LCP_THIS_LAYER_DOWN_TXT
|
|
Verbindungssteuerungsprotokolls (LCP) wird deaktiviert
|
|
; Link Control Protocol (LCP) This-Layer-Down
|
|
;
|
|
MSG_LCP_THIS_LAYER_FINISHED_TXT
|
|
Verbindungssteuerungsprotokolls (LCP) ist jetzt deaktiviert
|
|
; Link Control Protocol (LCP) This-Layer-Finished
|
|
;
|
|
MSG_RETURNING_UNKNOWN_OR_UNSUPPORTED_PROTOCOL_TXT
|
|
Unbekannte Protokollrahmendaten 0x%4lx werden zurückgeschickt.
|
|
; Returning unknown or unsupported protocol 0x%04lx frame.
|
|
;
|
|
MSG_SENDING_LINK_QUALITY_REPORT_TXT
|
|
Meldung zur Verbindungsqualität wird versandt:
|
|
; Sending link quality report:
|
|
;
|
|
MSG_LINK_QUALITY_REPORT_RECEIVED_TXT
|
|
Meldung zur Verbindungsqualität wurde empfangen versandt:
|
|
; Link quality report received:
|
|
;
|
|
MSG_INTERNET_PROTOCOL_SILENTLY_IGNORED_TXT
|
|
(Internetprotokoll wurde stillschweigend ignoriert)
|
|
; (Internet protocol silently ignored)
|
|
;
|
|
MSG_VJ_COMPRESSED_TCP_IP_SILENTLY_IGNORED_TXT
|
|
(Van Jacobson komprimiertes TCP/IP Protokoll wurde stillschweigend ignoriert)
|
|
; (Van Jacobson compressed TCP/IP silently ignored)
|
|
;
|
|
MSG_VJ_UNCOMPRESSED_TCP_IP_SILENTLY_IGNORED_TXT
|
|
(Van Jacobson unkomprimiertes TCP/IP Protokoll wurde stillschweigend ignoriert)
|
|
; (Van Jacobson uncompressed TCP/IP silently ignored)
|
|
;
|
|
MSG_IP_SILENTLY_IGNORED_TXT
|
|
(Internetprotokoll-Steuerungsprotokoll wurde stillschweigend ignoriert)
|
|
; (Internet Protocol control protocol silently ignored)
|
|
;
|
|
MSG_PAP_SILENTLY_IGNORED_TXT
|
|
(Kennwortanmeldungsprotokoll wurde stillschweigend ignoriert)
|
|
; (Password authentication protocol silently ignored)
|
|
;
|
|
MSG_LQR_SILENTLY_IGNORED_TXT
|
|
(Verbindungsqualitätsmeldung wurde stillschweigend ignoriert)
|
|
; (Link quality report silently ignored)
|
|
;
|
|
MSG_CHAP_SILENTLY_IGNORED_TXT
|
|
(Anmeldungsprotokoll 'CHAP' wurde stillschweigend ignoriert)
|
|
; (Challenge handshake authentication protocol silently ignored)
|
|
;
|
|
MSG_UNKNOWN_PROTOCOL_SILENTLY_IGNORED_TXT
|
|
(Unbekanntes Protokoll 0x%04lx wurde stillschweigend ignoriert)
|
|
; (Unknown or unsupported protocol 0x%04lx silently ignored)
|
|
;
|
|
MSG_CARRIER_SIGNAL_LOST_TXT
|
|
Verbindungssignal ging verloren.
|
|
; Carrier signal lost.
|
|
;
|
|
MSG_SERVER_HAS_CLOSED_SESSION_TXT
|
|
Gegenstelle hat Verbindung getrennt.
|
|
; Server has closed session.
|
|
;
|
|
MSG_NETWORKING_DEVICE_OUT_OF_SERVICE_CLOSING_LINK_AND_SESSION_TXT
|
|
Netzwerkgerätetreiber ist außer Betrieb genommen worden; Verbindung wird getrennt und Sitzung geschlossen.
|
|
; Networking device went out of service; closing link and session.
|
|
;
|
|
MSG_SERVER_NOT_RESPONDING_TO_PAP_REQUESTS_TXT
|
|
Gegenstelle antwortet nicht auf Anfragen mit dem Kennwortanmeldungsprotokoll; die Verbindung wird getrennt.
|
|
; Server is not responding to Password Authentication Protocol requests; closing link.
|
|
;
|
|
MSG_HEADER_COMPRESSION_IS_DISABLED_TXT
|
|
Kopfdatenkompression ist deaktiviert.
|
|
; Header compression is disabled.
|
|
;
|
|
MSG_CONNECTION_WAS_IDLE_AND_HAS_BEEN_CLOSED_TXT
|
|
Für mindestens %lD Sekunden wurden keine Daten über die Verbindung ausgetauscht. Die Verbindung wurde deshalb getrennt.
|
|
; The connection was idle for at least %ld seconds and has been closed.
|
|
;
|
|
MSG_CHAP_CHALLENGE_WRONG_SIZE_TXT
|
|
FEHLER: Anmeldedaten haben die falsche Größe (%lD Byte(s); 8 Bytes waren gefordert).
|
|
; ERROR: Challenge data is the wrong size (%ld bytes; should have been 8).
|
|
;
|
|
MSG_AUTHENTICATION_PROTOCOL_PAP_TXT
|
|
Kennwortanmeldungsprotokoll (PAP)
|
|
; Password Authentication Protocol
|
|
;
|
|
MSG_AUTHENTICATION_PROTOCOL_CHAP_TXT
|
|
'CHAP'-Anmeldungsprotokoll
|
|
; Challenge Handshake Authentication Protocol
|
|
;
|
|
MSG_AUTHENTICATION_PROTOCOL_UNKNOWN_TXT
|
|
Unbekannt
|
|
; Unknown
|
|
;
|
|
MSG_AUTHENTICATION_ALGORITHM_MD5_TXT
|
|
'MD5'-Anmeldeverfahren
|
|
; MD5 Message-Digest Algorithm
|
|
;
|
|
MSG_AUTHENTICATION_ALGORITHM_MS_CHAP_V1_TXT
|
|
Microsoft Erweiterung V1 des 'CHAP'-Anmeldeverfahrens
|
|
; Microsoft CHAP extension V1
|
|
;
|
|
MSG_AUTHENTICATION_ALGORITHM_MS_CHAP_V2_TXT
|
|
Microsoft Erweiterung V2 des 'CHAP'-Anmeldeverfahrens
|
|
; Microsoft CHAP extension V2
|
|
;
|
|
MSG_AUTHENTICATION_ALGORITHM_UNKNOWN_TXT
|
|
Unbekannt
|
|
; Unknown
|
|
;
|
|
MSG_LCP_LINK_LOOPING_TXT
|
|
FEHLER: Verbindung ist mit sich selbst gekoppelt; Protokollaushandlung wird abgebrochen...
|
|
; ERROR: Link is looped back; terminating negotiation...
|
|
;
|
|
MSG_LINK_IS_NOT_RESPONDING_TXT
|
|
FEHLER: Verbindung reagiert nicht; Verbindung wird abgebaut...
|
|
; ERROR: Link is not responding; closing connection...
|
|
;
|
|
MSG_LCP_PEER_IDENTIFICATION_TXT
|
|
Identifikation der Gegenstelle = '%s'
|
|
; Peer identification = '%s'
|
|
;
|
|
MSG_LCP_SESSION_TIME_REMAINING_TXT
|
|
Verbleibende Dauer der Sitzung = %s.
|
|
; Session time remaining = %s.
|
|
;
|
|
MSG_LCP_SESSION_TIME_REMAINING_MESSAGE_TXT
|
|
Verbleibende Dauer der Sitzung = %s. %s
|
|
; Session time remaining = %s. %s
|
|
;
|
|
MSG_LCP_SESSION_TIME_FORMAT_TXT
|
|
%ld:%02ld:%02ldh
|
|
; %ld:%02ld:%02ldh
|
|
;
|
|
MSG_LCP_SESSION_TIME_INFINITE_TXT
|
|
(unendlich)
|
|
; (infinite)
|
|
;
|
|
MSG_LOCAL_ADDRESS_NOT_PROVIDED_TXT
|
|
FEHLER: Adresse des lokalen Rechners wurde nicht angegeben.
|
|
; ERROR: local host IP address was not provided; shutting down.
|
|
;
|
|
MSG_PEER_ADDRESS_NOT_PROVIDED_TXT
|
|
FEHLER: Adresse der Gegenstelle wurde nicht angegeben.
|
|
; ERROR: peer IP address was not provided; shutting down.
|
|
;
|
|
MSG_TOO_MANY_IPCP_RECONFIGURATIONS_TXT
|
|
FEHLER: Es wurde zu oft versucht, das Internetprotokoll-Steuerungsprotokoll (IPCP) einzurichten. Die Protokollaushandlung wird abgebrochen.
|
|
; ERROR: too many reconfiguration attempts in Internet Protocol Control Protocol (IPCP); shutting down.
|
|
;
|
|
MSG_TOO_MANY_LCP_RECONFIGURATIONS_TXT
|
|
FEHLER: Es wurde zu oft versucht, das Verbindungssteuerungsprotokoll (LCP) einzurichten. Die Protokollaushandlung wird abgebrochen.
|
|
; ERROR: too many reconfiguration attempts in Link Control Protocol (LCP); shutting down.
|
|
;
|
|
MSG_PASSWORD_TRUNCATED_TXT
|
|
Warnung: das Kennwort wurde auf %lD Zeichen beschnitten.
|
|
; Warning: Password truncated to %ld characters.
|
|
;
|
|
MSG_OBSOLETE_ADDRESS_CONFIGURATION_REJECTED_TXT
|
|
Veraltete Methode zur Einrichtung der Netzadresse wurde abgelehnt.
|
|
; Obsolete address configuration method rejected.
|
|
;
|
|
MSG_SUGGESTING_PAP_TXT
|
|
Das Kennwortanmeldungsprotokoll (PAP) wird vorgeschlagen.
|
|
; Suggesting Password Authentication Protocol.
|
|
;
|
|
MSG_SUBSTITUTING_DUMMY_PEER_ADDRESS_TXT
|
|
Ersetze fehlende Netzadresse der Gegenstelle durch Vorgabe %ld.%ld.%ld.%ld.
|
|
; Substituting dummy remote IP address %ld.%ld.%ld.%ld in place of missing peer address.
|
|
;
|
|
MSG_LCP_CONFIG_MAXIMUM_RECEIVE_UNIT_TXT
|
|
Maximalgröße einer Empfangseinheit (MRU) = %lD Bytes.
|
|
; Maximum receive unit (MRU) = %ld
|
|
;
|
|
MSG_LCP_CONFIG_MAGIC_NUMBER_TXT
|
|
Kennzahl = 0x%08lx
|
|
; Magic number = 0x%08lx
|
|
;
|
|
MSG_LCP_CONFIG_QUALITY_PROTOCOL_TXT
|
|
Qualitätsprotokoll = %s
|
|
; Quality protocol = %s
|
|
;
|
|
MSG_LCP_CONFIG_ENABLED_TXT
|
|
aktiviert
|
|
; enabled
|
|
;
|
|
MSG_LCP_CONFIG_DISABLED_TXT
|
|
deaktiviert
|
|
; disabled
|
|
;
|
|
MSG_LCP_CONFIG_CHANGES_MADE_TXT
|
|
Die LCP-Konfiguration wurde seit dem Versand der letzten Anfrage geändert.
|
|
; LCP configuration was changed since the last request was sent.
|
|
;
|
|
MSG_IPCP_CONFIG_LOCAL_IP_ADDRESS_TXT
|
|
Lokale Netzadresse = %ld.%ld.%ld.%ld
|
|
; Local IP address = %ld.%ld.%ld.%ld
|
|
;
|
|
MSG_IPCP_CONFIG_PRIMARY_DNS_ADDRESS_TXT
|
|
Adresse des primären DNS-Servers = %ld.%ld.%ld.%ld
|
|
; Primary DNS address = %ld.%ld.%ld.%ld
|
|
;
|
|
MSG_IPCP_CONFIG_SECONDARY_DNS_ADDRESS_TXT
|
|
Adresse des sekundären DNS-Servers = %ld.%ld.%ld.%ld
|
|
; Secondary DNS address = %ld.%ld.%ld.%ld
|
|
;
|
|
MSG_IPCP_CONFIG_SOURCE_IP_ADDRESS_TXT
|
|
Netzadresse (Quelle) = %ld.%ld.%ld.%ld
|
|
; Source IP address = %ld.%ld.%ld.%ld
|
|
;
|
|
MSG_IPCP_CONFIG_DESTINATION_IP_ADDRESS_TXT
|
|
Netzadresse (Ziel) = %ld.%ld.%ld.%ld
|
|
; Destination IP address = %ld.%ld.%ld.%ld
|
|
;
|
|
MSG_IPCP_CONFIG_CHANGES_MADE_TXT
|
|
Die IPCP-Konfiguration wurde seit dem Versand der letzten Anfrage geändert.
|
|
; IPCP configuration was changed since the last request was sent.
|
|
;
|
|
MSG_REJECTING_INVALID_PEER_ADDRESS_TXT
|
|
Netzadresse der Gegenstelle ist unzulässig und wird abgelehnt.
|
|
; Remote IP address is invalid and will be rejected.
|
|
;
|
|
MSG_REJECTING_INVALID_DNS_ADDRESS_TXT
|
|
Netzadresse des DNS-Servers ist unzulässig und wird abgelehnt.
|
|
; DNS server address is invalid and will be rejected.
|
|
;
|
|
MSG_PPPOE_CLOSING_LINK_LAYER_TXT
|
|
Verbindungsschicht wird geschlossen...
|
|
; Closing link layer...
|
|
;
|
|
MSG_PPPOE_SENDING_ACTIVE_DISCOVERY_TERMINATE_REQUEST_TXT
|
|
Versende Anfrage zur Beendigung des aktiven PPPoE-Erkennungsvorganges.
|
|
; Sending PPPoE active discovery terminate request.
|
|
;
|
|
MSG_PPPOE_LINK_LAYER_IS_CLOSED_TXT
|
|
Verbindungsschicht wurde geschlossen (Gesamtdauer der Verbindung %ld:%02ld:%02ldh).
|
|
; Link layer is closed (total connection time %ld:%02ld:%02ldh).
|
|
;
|
|
MSG_PPPOE_NOT_ENOUGH_MEMORY_FOR_LOCAL_TAG_BUFFER_TXT
|
|
FEHLER: Speichermangel.
|
|
; ERROR: Not enough memory for local tag buffer.
|
|
;
|
|
MSG_PPPOE_BROADCASTING_PPPOE_ACTIVE_DISCOVERY_INIT_PACKET_TXT
|
|
Versende Datenpaket zum Beginn des aktiven PPPoE-Erkennungsprozesses.
|
|
; Broadcasting PPPoE active discovery initiation packet.
|
|
;
|
|
MSG_PPPOE_COULD_NOT_BROADCAST_PPPOE_ACTIVE_DISCOVERY_INIT_PACKET_TXT
|
|
FEHLER: Konnte Datenpaket zum Beginn des aktiven PPPoE-Erkennungsprozesses nicht versenden (%s, %s).
|
|
; ERROR: Could not broadcast PPPoE active discovery initiation packet (%s, %s).
|
|
;
|
|
MSG_PPPOE_CONNECTION_ATTEMPT_TIMED_OUT_TXT
|
|
Zeitüberschreitung beim Versuch des Verbindungsaufbaus.
|
|
; Connection attempt has timed out.
|
|
;
|
|
MSG_PPPOE_SENDING_PPPOE_ACTIVE_DISCOVERY_REQUEST_TO_SERVICE_NAME_TXT
|
|
Versende Datenpaket zur aktiven PPPoE-Erkennung an '%s' (%02lx:%02lx:%02lx:%02lx:%02lx:%02lx), Dienstname = '%s'.
|
|
; Sending PPPoE active discovery request to '%s' (%02lx:%02lx:%02lx:%02lx:%02lx:%02lx), service name = '%s'.
|
|
;
|
|
MSG_PPPOE_SENDING_PPPOE_ACTIVE_DISCOVERY_REQUEST_TO_TXT
|
|
Versende Datenpaket zur aktiven PPPoE-Erkennung an '%s' (%02lx:%02lx:%02lx:%02lx:%02lx:%02lx).
|
|
; Sending PPPoE active discovery request to '%s' (%02lx:%02lx:%02lx:%02lx:%02lx:%02lx).
|
|
;
|
|
MSG_PPPOE_COULD_NOT_SEND_PPPOE_ACTIVE_DISCOVERY_REQUEST_PACKET_TXT
|
|
FEHLER: Konnte Datenpaket zur aktiven PPPoE-Erkennung nicht versenden (%s, %s).
|
|
; ERROR: Could not send PPPoE active discovery request packet (%s, %s).
|
|
;
|
|
MSG_PPPOE_REQUESTED_SERVICE_NAME_NOT_ACCEPTABLE_MESSAGE_TXT
|
|
Geforderter Dienstname wurde nicht akzeptiert. %s
|
|
; Requested service name was not acceptable. %s
|
|
;
|
|
MSG_PPPOE_REQUESTED_SERVICE_NAME_NOT_ACCEPTABLE_TXT
|
|
Geforderter Dienstname wurde nicht akzeptiert.
|
|
; Requested service name was not acceptable.
|
|
;
|
|
MSG_PPPOE_AC_SYSTEM_ERROR_TXT
|
|
FEHLER: Zugriffsverwaltungsystem lieferte Fehler '%s'
|
|
; ERROR: AC-System-Error '%s'
|
|
;
|
|
MSG_PPPOE_GENERIC_ERROR_TXT
|
|
FEHLER: Allgemeiner Fehler '%s'
|
|
; ERROR: Generic-Error '%s'
|
|
;
|
|
MSG_PPPOE_SESSION_OPENED_TXT
|
|
Sitzung wurde geöffnet (Identifikationsnummer 0x%04lx).
|
|
; Session opened (ID 0x%04lx).
|
|
;
|
|
MSG_PPPOE_LINK_IS_ALREADY_OPEN_TXT
|
|
Verbindung wurde bereits geöffnet.
|
|
; Link is already open.
|
|
;
|
|
MSG_PPPOE_UNKNOWN_LOG_OPTION_TXT
|
|
Warnung: Unbekannte Protokollierungsoption '%s'.
|
|
; Warning: unknown log option '%s'.
|
|
;
|
|
MSG_PPPOE_LOG_DEVICE_STARTING_TXT
|
|
%s wird gestartet.
|
|
; %s starting.
|
|
;
|
|
MSG_PPPOE_COULD_NOT_OPEN_LOG_FILE_TXT
|
|
FEHLER: Protokollierungsdatei '%s' konnte nicht geöffnet werden (%s).
|
|
; ERROR: Could not open log file '%s' (%s).
|
|
;
|
|
MSG_PPPOE_NO_DEVICE_NAME_GIVEN_TXT
|
|
FEHLER: Es wurde kein Gerätetreiber angegeben.
|
|
; ERROR: No device name given.
|
|
;
|
|
MSG_PPPOE_SETTING_NUMBER_OF_READ_PACKETS_TXT
|
|
Anzahl der Leseanfragen = %lD
|
|
; Setting number of read packets = %ld
|
|
;
|
|
MSG_PPPOE_SETTING_NUMBER_OF_WRITE_PACKETS_TXT
|
|
Anzahl der Versandanfragen = %lD
|
|
; Setting number of write packets = %ld
|
|
;
|
|
MSG_PPPOE_SETTING_CONNECT_TIMEOUT_TXT
|
|
Setze Connect-Timeout = %ld
|
|
; Setting Connect-Timeout = %ld
|
|
;
|
|
MSG_PPPOE_SETTING_MAX_FAILURE_TXT
|
|
Setze Max-Failure = %ld
|
|
; Setting Max-Failure = %ld
|
|
;
|
|
MSG_PPPOE_SETTING_MAX_TERMINATE_TXT
|
|
Setze Max-Terminate = %ld
|
|
; Setting Max-Terminate = %ld
|
|
;
|
|
MSG_PPPOE_SETTING_MAX_CONFIGURE_TXT
|
|
Setze Max-Configure = %ld
|
|
; Setting Max-Configure = %ld
|
|
;
|
|
MSG_PPPOE_SETTING_TIMEOUT_TXT
|
|
Setze Timeout = %ld
|
|
; Setting Timeout = %ld
|
|
;
|
|
MSG_PPPOE_INVALID_LOCAL_IP_ADDRESS_TXT
|
|
FEHLER: Lokale Netzadresse %s ist unzulässig.
|
|
; ERROR: Invalid local IP address '%s'.
|
|
;
|
|
MSG_PPPOE_INVALID_REMOTE_IP_ADDRESS_TXT
|
|
FEHLER: Netzadresse %s der Gegenstelle ist unzulässig.
|
|
; ERROR: Invalid remote IP address '%s'.
|
|
;
|
|
MSG_PPPOE_INVALID_PRIMARY_DNS_IP_ADDRESS_TXT
|
|
FEHLER: Adresse %s des primären Domain Name System Server ist unzulässig.
|
|
; ERROR: Invalid primary domain name server IP address '%s'.
|
|
;
|
|
MSG_PPPOE_INVALID_SECONDARY_DNS_IP_ADDRESS_TXT
|
|
FEHLER: Adresse %s des sekundären Domain Name System Server ist unzulässig.
|
|
; ERROR: Invalid secondary domain name server IP address '%s'.
|
|
;
|
|
MSG_PPPOE_SETTING_MTU_TXT
|
|
Setzte MTU = %ld
|
|
; Setting MTU = %ld
|
|
;
|
|
MSG_PPPOE_SETTING_PPOE_SERVICE_TXT
|
|
PPPoE-Dienst = '%s'
|
|
; PPPoE service = '%s'
|
|
;
|
|
MSG_PPPOE_SETTING_SANA_RAW_IO_TXT
|
|
Setze SANA2-Raw-IO = %s
|
|
; Setting SANA2-Raw-IO = %s
|
|
;
|
|
MSG_PPPOE_SETTING_BYPASS_TXT
|
|
Setze Bypass = %s
|
|
; Setting Bypass = %s
|
|
;
|
|
MSG_PPPOE_SETTING_REJECT_PAP_TXT
|
|
Setze Reject-PAP = %s
|
|
; Setting Reject-PAP = %s
|
|
;
|
|
MSG_PPPOE_COULD_NOT_CREATE_LINK_IO_REQUEST_TXT
|
|
FEHLER: Eingabe-/Ausgabeanfrage konnte nicht erzeugt werden.
|
|
; ERROR: Could not create link I/O request.
|
|
;
|
|
MSG_PPPOE_OPENING_DEVICE_UNIT_TXT
|
|
Gerät '%s', Einheit %ld, wird geöffnet.
|
|
; Opening '%s', unit %ld.
|
|
;
|
|
MSG_PPPOE_COULD_NOT_OPEN_DEVICE_UNIT_TXT
|
|
FEHLER: Gerät '%s', Einheit %ld, konnte nicht geöffnet werden (%s).
|
|
; ERROR: Could not open '%s', unit %ld (%s).
|
|
;
|
|
MSG_PPPOE_COULD_NOT_QUERY_TXT
|
|
FEHLER: Konnte Eigenschaften von Gerät '%s', Einheit %ld, nicht ermitteln (%s, %s).
|
|
; ERROR: Could not query '%s', unit %ld (%s, %s).
|
|
;
|
|
MSG_PPPOE_DEVICE_UNIT_NOT_AN_ETHERNET_DRIVER_TXT
|
|
FEHLER: Gerät '%s', Einheit %ld, ist kein Treiber für Ethernet-Netze.
|
|
; ERROR: '%s', unit %ld is not an Ethernet driver.
|
|
;
|
|
MSG_PPPOE_COULD_NOT_OBTAIN_STATION_ADDRESS_OF_TXT
|
|
FEHLER: Die Geräteadresse von Gerät '%s', Einheit %ld, ließ sich nicht bestimmen (%s, %s).
|
|
; ERROR: Could not obtain station address of '%s', unit %ld (%s, %s).
|
|
;
|
|
MSG_PPPOE_COULD_NOT_CONFIGURE_DEVICE_UNIT_TXT
|
|
FEHLER: Gerät '%s', Einheit %ld, ließ sich nicht mit Geräteadresse %02lx:%02lx:%02lx:%02lx:%02lx einrichten (%s, %s).
|
|
; ERROR: Could not configure '%s', unit %ld with address %02lx:%02lx:%02lx:%02lx:%02lx (%s, %s).
|
|
;
|
|
MSG_PPPOE_LINK_LAYER_IS_READY_TXT
|
|
Verbindungsschicht ist bereit.
|
|
; Link layer is ready.
|
|
;
|
|
MSG_PPPOE_IOERR_OPENFAIL_TXT
|
|
Gerät/Einheit konnte nicht geöffnet werden
|
|
; Device/unit failed to open
|
|
;
|
|
MSG_PPPOE_IOERR_ABORTED_TXT
|
|
Anfrage wurde verfrüht beendet
|
|
; Request terminated early
|
|
;
|
|
MSG_PPPOE_IOERR_NOCMD_TXT
|
|
Befehl wird vom Gerät nicht unterstützt
|
|
; Command not supported by device
|
|
;
|
|
MSG_PPPOE_IOERR_BADLENGTH_TXT
|
|
Ungültige Länge
|
|
; Not a valid length
|
|
;
|
|
MSG_PPPOE_IOERR_BADADDRESS_TXT
|
|
Ungültige Adresse
|
|
; Invalid address
|
|
;
|
|
MSG_PPPOE_IOERR_UNITBUSY_TXT
|
|
Gerät ließ sich öffnen, aber die gewünschte Einheit ist belegt
|
|
; Device opens OK, but requested unit is busy
|
|
;
|
|
MSG_PPPOE_IOERR_SELFTEST_TXT
|
|
Selbsttest des Gerätes schlug fehl
|
|
; Hardware failed self-test
|
|
;
|
|
MSG_PPPOE_S2ERR_NO_RESOURCES_TXT
|
|
Fehler beim Anfordern von Ressourcen
|
|
; Resource allocation failure
|
|
;
|
|
MSG_PPPOE_S2ERR_BAD_ARGUMENT_TXT
|
|
Unzulässiges Argument
|
|
; Bad argument
|
|
;
|
|
MSG_PPPOE_S2ERR_BAD_STATE_TXT
|
|
Unzulässiger Zustand
|
|
; Inappropriate state
|
|
;
|
|
MSG_PPPOE_S2ERR_BAD_ADDRESS_TXT
|
|
Unzulässige Adresse
|
|
; Bad address
|
|
;
|
|
MSG_PPPOE_S2ERR_MTU_EXCEEDED_TXT
|
|
Maximalgröße der Übertragungsheit überschritten
|
|
; Maximum transmission unit exceeded
|
|
;
|
|
MSG_PPPOE_S2ERR_NOT_SUPPORTED_TXT
|
|
Gerät unterstützt Befehl nicht
|
|
; Command not supported by hardware
|
|
;
|
|
MSG_PPPOE_S2ERR_SOFTWARE_TXT
|
|
Softwarefehler aufgetreten
|
|
; Software error detected
|
|
;
|
|
MSG_PPPOE_S2ERR_OUTOFSERVICE_TXT
|
|
Treiber ist vom Netz getrennt
|
|
; Driver is offline
|
|
;
|
|
MSG_PPPOE_S2ERR_TX_FAILURE_TXT
|
|
Übertragungsversuch schlug fehl
|
|
; Transmission attempt failed
|
|
;
|
|
MSG_PPPOE_UNKNOWN_IO_ERROR_TXT
|
|
Unbekannter Eingabe-/Ausgabefehler %ld
|
|
; Unknown I/O error %ld
|
|
;
|
|
MSG_PPPOE_UNKNOWN_SANA2_IO_ERROR_TXT
|
|
Unbekannter SANA-II-Gerätefehler %ld
|
|
; Unknown SANA-II error %ld
|
|
;
|
|
MSG_PPPOE_S2WERR_GENERIC_ERROR_TXT
|
|
Keine genaueren Informationen verfügbar
|
|
; No specific information available
|
|
;
|
|
MSG_PPPOE_S2WERR_NOT_CONFIGURED_TXT
|
|
Einheit ist nicht eingerichtet
|
|
; Unit is not configured
|
|
;
|
|
MSG_PPPOE_S2WERR_UNIT_ONLINE_TXT
|
|
Einheit ist derzeit mit dem Netz verbunden
|
|
; Unit is currently online
|
|
;
|
|
MSG_PPPOE_S2WERR_UNIT_OFFLINE_TXT
|
|
Einheit ist derzeit vom Netz getrennt
|
|
; Unit is currently offline
|
|
;
|
|
MSG_PPPOE_S2WERR_ALREADY_TRACKED_TXT
|
|
Protokoll wird bereits verfolgt
|
|
; Protocol is already tracked
|
|
;
|
|
MSG_PPPOE_S2WERR_NOT_TRACKED_TXT
|
|
Protokoll wird nicht verfolgt
|
|
; Protocol is not tracked
|
|
;
|
|
MSG_PPPOE_S2WERR_BUFF_ERROR_TXT
|
|
Pufferverwaltung lieferte einen Fehler
|
|
; Buffer management function returned an error
|
|
;
|
|
MSG_PPPOE_S2WERR_SRC_ADDRESS_TXT
|
|
Quelladresse ist unzulässig
|
|
; Source address problem
|
|
;
|
|
MSG_PPPOE_S2WERR_DST_ADDRESS_TXT
|
|
Zieladresse ist unzulässig
|
|
; Destination address problem
|
|
;
|
|
MSG_PPPOE_S2WERR_BAD_BROADCAST_TXT
|
|
Broadcastadresse ist unzulässig
|
|
; Broadcast address problem
|
|
;
|
|
MSG_PPPOE_S2WERR_BAD_MULTICAST_TXT
|
|
Multicastadresse ist unzulässig
|
|
; Multicast address problem
|
|
;
|
|
MSG_PPPOE_S2WERR_MULTICAST_FULL_TXT
|
|
Multicastadressliste ist voll
|
|
; Multicast address list is full
|
|
;
|
|
MSG_PPPOE_S2WERR_BAD_EVENT_TXT
|
|
Art des Ereignisses ist unzulässig
|
|
; Unsupported event class
|
|
;
|
|
MSG_PPPOE_S2WERR_BAD_STATDATA_TXT
|
|
Zustandsdaten sind nicht korrekt
|
|
; StatData failed sanity check
|
|
;
|
|
MSG_PPPOE_S2WERR_IS_CONFIGURED_TXT
|
|
Einrichtung wurde mehrfach durchgeführt
|
|
; Attempted to configure twice
|
|
;
|
|
MSG_PPPOE_S2WERR_NULL_POINTER_TXT
|
|
NULL-Zeiger ist unzulässig
|
|
; NULL pointer detected
|
|
;
|
|
MSG_PPPOE_S2WERR_TOO_MANY_RETRIES_TXT
|
|
Übertragung schlug fehl - die maximale Anzahl von Wiederholungen wurde überschritten
|
|
; Transmission failed - too many retries
|
|
;
|
|
MSG_PPPOE_S2WERR_RCVREL_HDW_ERR_TXT
|
|
Vom Treiber korrigierbarer Gerätefehler
|
|
; Driver fixable hardware error
|
|
;
|
|
MSG_PPPOE_UNKNOWN_WIRE_ERROR_TXT
|
|
Unbekannter SANA-II-Übertragungsfehler %ld
|
|
; Unknown wire error %ld
|
|
;
|
|
MSG_PPPOE_ON_TXT
|
|
ON
|
|
; ON
|
|
;
|
|
MSG_PPPOE_OFF_TXT
|
|
OFF
|
|
; OFF
|
|
;
|
|
MSG_PPPOE_SETTING_PAP_TIMEOUT_TXT
|
|
Setze PAP-Timeout = %ld
|
|
; Setting PAP-Timeout = %ld
|
|
;
|
|
MSG_PPPOE_SETTING_PAP_RETRY_TXT
|
|
Setze PAP-Retry = %ld
|
|
; Setting PAP-Retry = %ld
|
|
;
|
|
MSG_PPPOE_ACCESS_CONCENTRATOR_NAME_TXT
|
|
Access-Concentrator-Name = '%s'
|
|
; Access-Concentrator-Name = '%s'
|
|
;
|
|
MSG_PPPOE_SERVICE_NAME_TXT
|
|
Advertized Service-Name = '%s'
|
|
; Advertized Service-Name = '%s'
|
|
;
|
|
MSG_PPPOE_SETTING_IDLE_TIMEOUT_TXT
|
|
Setze Idle-Timeout = %ld
|
|
; Setting Idle-Timeout = %ld
|
|
;
|
|
MSG_PPPOE_COULD_NOT_SEND_FRAME_PACKET_TXT
|
|
FEHLER: Konnte PPPoE-Rahmendatenpaket nicht versenden (%s, %s).
|
|
; ERROR: Could not send PPPoE frame packet (%s, %s).
|
|
;
|
|
MSG_PPPOE_ASYNC_WRITE_REQUEST_RETURNED_WITH_ERROR_TXT
|
|
FEHLER: Ausgabeanfrage schlug fehl (%s, %s).
|
|
; ERROR: Write I/O request failed (%s, %s).
|
|
;
|
|
MSG_PPPOE_MAXIMUM_NUMBER_OF_WRITE_REQUESTS_QUEUED_TXT
|
|
Maximale Anzahl aktiver Ausgabeanfragen = %lD.
|
|
; Maximum number of write requests queued = %ld.
|
|
;
|
|
MSG_PPPOE_MAXIMUM_NUMBER_OF_READ_REQUESTS_RETURNED_TXT
|
|
Maximale Anzahl aktiver Eingabeanfragen = %lD.
|
|
; Maximum number of read requests in use at a time = %ld.
|
|
;
|
|
MSG_PPPOE_SETTING_SEND_ID_TXT
|
|
Setze Send-ID = %s
|
|
; Setting Send-ID = %s
|
|
;
|
|
MSG_PPPOE_SETTING_PEER_IDLE_TIMEOUT_TXT
|
|
Setze Peer-Idle-Timeout = %ld
|
|
; Setting Peer-Idle-Timeout = %ld
|
|
;
|
|
MSG_PPPOE_SETTING_MAX_RECONFIGURE_TXT
|
|
Setze Max-Reconfigure = %ld
|
|
; Setting Max-Reconfigure = %ld
|
|
;
|
|
MSG_PPPOE_SETTING_PPOE_AC_TXT
|
|
Setze PPPoE access-concentrator = '%s'
|
|
; PPPoE access-concentrator = '%s'
|
|
;
|
|
MSG_PPPOE_ACCESS_CONCENTRATOR_NAME_IGNORED_TXT
|
|
Access-Concentrator-Name = '%s' (wird ignoriert)
|
|
; Access-Concentrator-Name = '%s' (ignored)
|
|
;
|
|
MSG_PPPOE_SERVICE_NAME_IGNORED_TXT
|
|
Advertized Service-Name = '%s' (wird ignoriert)
|
|
; Advertized Service-Name = '%s' (ignored)
|
|
;
|
|
MSG_PPPOE_SETTING_DUMMY_REMOTE_ADDRESS_TXT
|
|
Setze Dummy-Remote-Address = %s
|
|
; Setting Dummy-Remote-Address = %s
|
|
;
|
|
MSG_PPPOE_CONNECTION_ATTEMPT_ABORTED_TXT
|
|
Verbindungsaufbau wurde abgebrochen.
|
|
; Connection attempt was aborted.
|
|
;
|